Ventis 45" Zero Clearance Wood Fireplace

VentisSKU: VB00005

Sale price$4,999.00


Ventis HE350 Zero Clearance Wood Fireplace is an elegant, high-performance fireplace. It burns up to 10 hours and holds up to 60 pounds of hardwood, the firebox can hold up to 25-Inches of log. The fireplace uses an automated air intake system that allows the fire to reach the perfect temperature before going into slow burn mode. Two giant double glass doors provide an impressive viewing area, making it the centerpiece of any room.

  • Designed mainly for heating large spaces
  • Patented design of the intelligent air control mechanism
  • Luxurious effect created by an eye-catching fireplace
  • Large glass surface
  • EPA 2020 certified
  • Non-catalytic combustion technology
  • Installation authorized on the Island of Montreal
  • Firestop made of high density insulation board
  • 176 CFM blower included
  • 8" Ventis stainless steel anchor plate included
  • Fresh air intake adapter included

Required Option: 

  • (VBA1540) Traditional faceplate and (AC02360) Classic molded refractory brick panels required to complete this unit. Not Included, Sold Separately.

CA Residents: See Prop 65 WARNING.

Appliance Performance

Fuel type Dry cordwood (16" recommended)
Recommended heating area 1,000 - 2,800 ft²
Overall firebox volume 4.28 ft³
EPA loading volume 4.28 ft³
Maximum burn time 11 Hours
Maximum heat output-dry cordwood 95,000 BTU/h
Minimum overall heat output rate 16,900 BTU/h (5.0 kW)
Maximum overall heat output rate 43,000 BTU/h (12.6 kW)
Average efficiency-dry cordwood (HHV) 64 %
Average efficiency-dry cordwood (LHV) 69 %
Optimum efficiency 70 %
Optimum heat transfer efficiency 69 %
Average particulate emission rate 1.6 g/h
Average CO 159.0 g/h
  • Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
  • Optimum overall efficiency at a specific burn rate (LHV).
  • This appliance is officially tested and certified by an independent agency.
  • The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
  • As measured per CSA B415.1-10 stack loss method.
  • Higher Heating Value of the fuel.
  • Lower Heating Value of the fuel.
  • The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
  • Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
  • Carbon monoxyde.

General Features

Premium quality blower included (CFM) 176 CFM included
Certified according to applicable standards CAN/USA accredited laboratory
Combustion technology Non-catalytic
Stainless-steel secondary-air system Yes
Flue outlet diameter 8"
Recommended chimney diameter 8"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height 15"
Overall dimension (Width) 45 1/4"
Overall dimension (Height) 43 3/8"
Overall dimension (Depth) 31 3/4"
Door type Double, glass with cast iron frame
Door opening size (Width) 33"
Door opening size (Height) 12 3/4"
Glass type Ceramic glass
Glass surface - W x H 29 3/4" x 13 1/2"
Firebox size (Width) 25 3/8"
Firebox size (Height) 25 3/8"
Firebox size (Depth) 17 7/8"
Maximum log length 25"
Log positioning Loading over width
Baffle type High density insulation board
High-efficiency certified appliance Yes, EPA 2020 certified
Canadian Standard (emissions) CSA B415.1-10
USA Standard (emissions) EPA / ASTM WK47329
Canadian Standard (safety) ULC S610
USA Standard (safety) UL 127
Shipping weight 555 lb (252 kg)




Traditional Style Faceplate (VBA1540)

  • Traditional style faceplate
  • Specifically designed for use with the HE350 wood burning fireplace.
  • Required to complete this unit.



Classic Moulded Refractory Brick Panels (AC02360)

  • Classic moulded brick panels
  • Specifically designed for use with the HE350 wood burning fireplace.
  • Required to complete this unit.



5-Inch Fresh Air Intake Register with Airtight Damper

  • 5-Inch diameter for maximum airflow
  • Fully adjustable wall control included
  • Allows outside combustion air to feed the appliance
  • Airtight damper prevents air drafts when not in use
  • Designed for use with the HE350 wood fireplace



Modern Style Warm Air Circulation Grille

  • Modern style warm air circulation grille is a perfect addition to your fireplace.
  • The installation is easy and comes with detailed and clear instructions.



Fireplace Carrying Handle Kit

  • Fireplace carrying handle kit makes transporting the fireplace to the install location much easier.
  • The handle kit enables you to attach handles to the sides of the fireplace and gives you a better grip when lifting the fireplace.


Forced Air Kit

  • Forced air kit allows you to heat other rooms of the home adding to the heating capacity of the HE350 fireplace.
  • Designed for use with HE350 wood fireplace.



  • Limited lifetime warranty.

You may also like

Recently viewed