Ventis 37" Zero Clearance High-Efficiency Wood Fireplace

Ventis HE250R is a large classic fireplace with single door that is recommended for heating larger spaces from 750 to 2,200 square feet. The firebox is lined with moulded refractory bricks for better heat distribution. This unit offers non-catalytic combustion technology and a Stainless-steel secondary-air system which improves gas combustion. The HE250R can hold 20-Inch logs, 80,000 BTU/H max, and is EPA 2020 approved. 6-Inch Ventis stainless steel anchor plate & fresh air intake adapter included.

• Designed mainly for heating
  
• Large classic fireplace with single door
  
• EPA 2020 certified
  
• Non-catalytic combustion technology
  
• Installation authorized on the Island of Montreal
  
• Firestop made of high density insulation board
  
• Ventis distinctive louvers included
  
• 176 CFM blower included
  
• Molded refractory stones
  
• 6" Ventis stainless steel anchor plate included
  
• Fresh air intake adapter included
  

Required Option: 

• Modern Faceplate (VBA1560).
  

CA Residents: See Prop 65 WARNING.

Appliance Performance

Fuel type	Dry cordwood (16" recommended)
Recommended heating area	750 - 2,200 ft²
Overall firebox volume	2.5 ft³
Maximum burn time	8 Hours
EPA loading volume	1.69 ft³
Maximum heat output-dry cordwood	80,000 BTU/h
Minimum overall heat output rate	14,200 BTU/h (4.16 kW)
Maximum overall heat output rate	48,200 BTU/h (14.13 kW)
Average efficiency-dry cordwood (HHV)	68 %
Average efficiency-dry cordwood (LHV)	73 %
Optimum efficiency	74 %
Optimum heat transfer efficiency	71 %
Average particulate emission rate	1.14 g/h
Average CO	53 g/h

• Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
• Optimum overall efficiency at a specific burn rate (LHV).
• This appliance is officially tested and certified by an independent agency.
• The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
• As measured per CSA B415.1-10 stack loss method.
• Higher Heating Value of the fuel.
• Lower Heating Value of the fuel.
• The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
• Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
• Carbon monoxyde.

General Features

Premium quality blower included (CFM)	176 CFM included
Certified according to applicable standards	CAN/USA accredited laboratory
Flue outlet diameter	6"
Recommended chimney diameter	6"
Type of chimney	CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height	15"
Overall dimension (Width)	36 3/4"
Overall dimension (Height)	37 1/4"
Overall dimension (Depth)	28 5/8"
Door type	Single, glass with cast iron frame
Door opening size (Width)	25 3/8"
Door opening size (Height)	10 9/16"
Glass type	Ceramic glass
Glass surface - W x H	24" x 10 5/8"
Firebox size (Width)	20 3/8"
Firebox size (Height)	12 1/8"
Firebox size (Depth)	13"
Maximum log length	20"
Log positioning	Loading over width
High-efficiency certified appliance	Yes, EPA 2020 approved
Canadian Standard (safety)	ULC S610
USA Standard (safety)	UL 127
Combustion technology	Non-catalytic
Baffle type	High density insulation board
Stainless-steel secondary-air system	Yes
USA Standard (emissions)	EPA
Canadian Standard (emissions)	CSA B415.1-10
Shipping weight	495 lb (225 kg)

OPTIONS & ACCESSORIES

	Modern Style Faceplate (VBA1560) Size: 36 Inch Finish: Black Modern style Use with HE250R wood fireplace Required to complete this unit
	Surround/Shelf Heatshield Heat shield Optional accessory Designed for under mantel use Protects mantel from rising heat from fireplace Designed for use with HE250R wood fireplace
	Firescreen Door Optional accessory Designed for use with HE250R wood fireplace
	4-Inch Fresh Air Intake Adapter 4-Inch fresh air intake adapter Allows outside combustion air to feed the appliance Airtight damper prevents air drafts when not in use Fully adjustable wall control included
	Hot Air Gravity Kit (Traditional) Traditional style hot air gravity kit allows you to heat other parts of the home directly above the Ventis fireplace. Designed for use with HE250R wood fireplace.
	Hot Air Gravity Kit (Modern with adjustable pipes) Modern style hot air gravity kit allows you to heat other parts of the home directly above the Ventis fireplace. Designed for use with HE250R wood fireplace.
	Fireplace Carrying Handle Kit Fireplace carrying handle kit makes transporting the fireplace to the install location much easier. The handle kit enables you to attach handles to the sides of the fireplace and gives you a better grip when lifting the fireplace.
	Forced Air Kit Forced air kit allows you to heat other rooms of the home adding to the heating capacity of the Ventis HE250R fireplace. Designed for use with HE250R wood fireplace.
	6" x 25' Insulated Flex Pipe 6-Inch x 25ft Insulated flex pipe for forced air kit Designed for use with HE250R wood fireplace.

 

Warranty

• Limited lifetime warranty.